This is actually one of the success stories of trapping. PETA’s trap propoganda sheet would have you thinking traps operate indiscriminately and always kill. The truth is the conibear trap in the right hand side of the picture did what it was designed to do which is trap animals which crawl through it. Mr Possum here got his leg stuck because he was walking along the fenceline and he happened to brush the trap. I was able to open the trap and free the possum who was no worse for wear (and promptly tried to get into the garden). It’s good to know we can trap specific nuisance animals and leave most of the ecosystem intact.
Groundhog body count is 5. Four in the trap and one from my bow.
The groundhog snare has been setting consistently. The problem is he’s either wiggling his way out, or I find my wire cut. Admittedly I used spiderwire fishing line instead of steel, but groundhogs have excellent teeth and claws and it’s become apparent to me that snaring it isn’t going to work. I’m not around when he’s snared to see what’s going on, and it renders the snare ineffective as a result. When he’s snared, all he’s got is time to work on it.
The snare is a really simple tip up – there’s a cinder block balanced on my fence with a branch under it acting as a prop. The line is tied through the block, through one of the diamonds in the fence, tied to the prop and then went to a loop. So far it’s been tripped three times and if I haven’t gotten the hog in three tips it’s not going to happen. At least two of those had the groundhog in the snare because the loop was chewed on or frayed. The idea was the spider wire would constrict the groundhog but I’ve come to realize the fundamental problem is that it’s too near a fence and growth the groundhog can prop himself up on. He gets snared, but the funnel effect from the brush gives him enough purchase he can work on the line before suffocating, and the spiderwire is of such high quality that it won’t snag on itself either direction.
I was thinking about buying a hav-a-hart trap but frankly the one for groundhogs starts at $70. My Economics of Caring end at about $20 (about the cost of losing one carbon arrow) so the pricepoint for a live trap was well above what I was interested in. Part two was the goal really never was a live trap, the snare I set was fully intended to go around his neck and I was just going to use the maul to dispatch him humanely when I found him. If I got on him quickly enough I was going to throw him in a box and drive him to the far end of the park, but frankly I briefed my wife we were going to find a hog hanging from the fence one morning.
After two weeks and three trap tips I was largely fed up with the operation and I had taken a shot at him with the bow. The bow doesn’t track like the rifle does through brush, so I was even going to nail him with the rifle with subsonics. I wasn’t sure a subsonic 22 was going to put him down, so this was easily the most grisly of options. I happened to be browsing the internet for better snare designs and someone mentioned the conibear trap. To make things even better – the trap is designed as a kill trap. And finally it has the last requirement which is important: the whiskers for the trigger are inside the body of the trap vertically, so I don’t need to worry about larger animals (like our deer population) stepping into them and having their legs broken. The neighbors cat may end up being a casualty, but she typically jumps over the fences and doesn’t go into the earth under them, so I think we’re OK. The local sporting goods shop had the #160 which is exactly the size I wanted. They also had the trap tool, which is basically the worlds largest set of snap ring pliers. Since I figured I could use those also I purchased them.
Total cost was $25, which is a bit more than I wanted to spend but now I have a trap set I can use over and over again.